한국어 
English 
العربية 
Français 
Deutsch 
Русский 
Español 
Water cooling strand pelletizing
Characteristics
This method is usually used in a twin-screw extruder, in which the extruded material is cut and strand into particles. Water is used to cool particles, so it is suitable for applications that require material cooling. Suitable for the production of most plastic particles. Such as PP,PE color master batch,engineering plastics, high temperature modification PA, PEI etc.
What kind of plastics should be processed?
Water-cooling strand pelletizing is suitable for most common plastic materials, especially those not easily affected by high temperature or heat sensitivity.
Here are some common types of plastics suitable for water-cooling strand pelletizing:
Polyethylene (PE): including low-density polyethylene (LDPE) and high-density polyethylene (HDPE), etc.
Polypropylene (PP): polypropylene is a common plastic material, which is suitable for water-cooling strand pelletizing.
PA
PA66
PMMA
Polystyrene (PS): including general-purpose polystyrene (GPPS) and high impact polystyrene (HIPS).
Polycarbonate (PC): although PC is a high temperature plastic, water-cooling strand can be used for granulation under appropriate conditions.
Polyether ether ketone (PEEK): this high-performance engineering plastic usually needs to be granulated at a lower temperature.
It should be noted that for some special plastics, especially high-temperature or heat-sensitive materials, other granulation methods may be required to ensure that they do not affect their properties or cause decomposition. Therefore, when choosing the granulation method, the decision should be made according to the specific plastic type and production requirements.
Granuwel Water Cooling Strand Pelletizing System
Air cooling strand pelletizing
Characteristics
Similar to water strand pelletizing granulation, but in this method, the air cooling is used to cool the particles. This method is suitable for some heat-sensitive materials and some hydrophilic materials, or some water-degradable materials，because it does not require the use of water for cooling.
What kind of plastics should be processed?
PLA+PBAT+corn starch or other bio-degradable(such as PSM) compounding and some hydrophilic materials such as PVA， PVOH ，EVOH etc.
Polyester resin (PET): PET is a common plastic commonly used in the manufacture of bottles and fibers. It is easy to decompose at high temperature, so it is suitable for air-cooled drawing and granulation.
Polycarbonate (PC): PC is a high performance engineering plastic, which is sensitive to high temperature. Therefore, air cooling strand pelletizing is an effective way of granulation.
Polyoxymethylene (POM): POM may be degraded at high temperature, so air cooling strand pelletizing is a suitable granulation method.
Polytetrafluoroethylene (PTFE): PTFE is a low-friction, high-temperature material, so air cooling strand pelletizing is suitable to maintain its properties.
Polyether ether ketone (PEEK): PEEK is a kind of high performance plastic, which is very sensitive to high temperature, so air-cooled strip granulation is a suitable choice.
Polysulfone (PSU/PPSU): these high-temperature plastics remain stable at high temperatures, so they are suitable for granulation with air cooling strand pelletizing.
It should be noted that air cooling strand pelletizing is usually used for plastics that need to be extruded at high temperatures to avoid material decomposition.
However, the choice of granulation method is also affected by the production demand and extrusion equipment, so the most suitable granulation method should be chosen according to the specific situation.
Granuwel Air Cooling Strand Pelletizing System
Air cooling hot face pelletizing
Characteristics
This is a method of using air to cut extruded materials into particles. It is suitable for some viscous materials because the air can effectively separate the particles.
What kind of plastics should be treated?
Air cooling hot face pelletizing is suitable for some specific plastic materials, usually those that are soft or viscous at high temperatures.
What kind of plastics should be processed?
PE + CaCO3 fillers： filling percentage 80%CaCO3， air cooling die face pelletizing is avaliable.
PE＋CaO industry desiccant（moisture absorption master batch）： air cooling die face pelletizing is necessary.
Rigid polyvinyl chloride (PVC): although water-cooled granulation is usually available for PVC, it is also possible to use air cooling hot face pelletizing in special cases.
Hard plastics: some hard plastics may be easier to cut at high temperatures, so air cooling hot face pelletizing can be an effective way of granulation.
The most suitable granulation method needs to be determined according to the specific plastic type, production demand and extrusion equipment.
Air cooling hot face pelletizing is usually used in situations where it is necessary to prevent particles from adhering, as air cooling can effectively separate the particles and ensure that they remain in a separate shape.
Granuwel Air Cooling Hot Face Pelletizing System
Water ring hot face pelletizing
Characteristics
This method involves cutting the extruded material through the water ring die surface.
This method is suitable for the production of high viscosity or high temperature materials, because the water ring mold surface can effectively cool and cut the material.
What kind of plastics should be treated?
The water ring hot face pelletizing is suitable for some specific plastic materials, usually those that are easy to adhere at high temperature or need to be cut after cooling.
Here are some common types of plastics suitable for water ring hot face pelletizing:
Heat-sensitive plastics: the water ring hot face pelletizing is suitable for heat-sensitive plastics that need to be cut at lower temperatures to avoid material decomposition.
PE filled with ＣａＣＯ３,Talc,TiO2 etc with the water ring hot-face pelletizing system,can achieve to high output and high efficiency of cooling.
TPU Modification Granulation
TPE Modification Granulation
TPO Modification Granulation
EVA and hot melt adhesives Modification Granulation etc.
Polyurethane (PU): PU is a highly elastic plastic, which usually needs to be hot-cut through the water ring mold surface to maintain its properties.
The most suitable granulation method needs to be determined according to the specific plastic type, production demand and extrusion equipment.
The water ring hot face pelletizing is usually used in situations where the material needs to be cooled and cooled during cutting to ensure that the particles maintain their shape and avoid adhesion.
Granuwel Water Ring Hot Face Pelletizing System
Underwater Pelletizing
Characteristics
This method is usually used in twin-screw extruders,the extruded materials after cuttingin water and transported through cooling pipes to a dehydrator for dehydration and drying
This method is suitable for high production, or have strict requirements for particle shape occasions. Suitable for most plastic pellet production
What kind of plastics should be treated?
TPU Modification Granulation
TPE Modification Granulation
TPO Modification Granulation
EVA and hot melt adhesives Modification Granulation etc.
Polyurethane (PU): PU is a highly elastic plastic, which usually needs to be hot-cut through the water ring mold surface to maintain its properties.
If you want know more, welcome to contact us!
회사 소개
Nanjing Granuwel Machinery CO., LTD is specializing in the R&D design and manufacture of high polymer extruders, our team of top-level extrusion professionals provides the right extruder for your exact application.
난징 그라누웰 기계 유한공사(난징 그라누웰 기계 유한공사)
We possess excellent capability of innovation and product development, and desire to provide the best products for our customers through the improvement of equipment structure and reduction of equipment energy consumption through our practical experiences and technical innovation.
For any question or inquiry, warmly welcome to contact us!!!
전화: +86-25-86199956
모바일: +86-13813371123
Web: https://toolant.net