Komponenter

Its main components are Driving valve system, Die head of template system, Pelletizer system, Water tank and heating system, Centrifugal hydroextractor system, Vibrating Sieve and final Product silo. Large output can be directly configured with automatic weighing and packaging system.

1.Loss-in-weight feeder    2. Material silo   3. Forced feeding   4. Twin screw extruder  5. Diverter valve    6. Screen changer  7. Underwater pelletizer  8. Centrifugal dewatering   9. Vibrator  10. Product container

Four Special Applications Of Underwater Pelletizing System

There are 4 special applications that can only be handled by underwater pelletizing systems.

1) Round particles with diameter ≤1mm.

Round particles can only be produced through underwater pelletizing systems.
Microparticles are mostly used in the preparation of high-concentration masterbatch. The particles are very small, and the dispersion effect can be achieved without or using a small amount of dispersant. This results in significant cost savings. Masterbatches in particulate form are easier to handle, better metered and dust-free.

2) High output

Other types of pelletizing systems have difficulty in handling outputs of more than 1000kg/h. Underwater pelletizing systems can handle throughputs up to 50 tons/hour.

3) Soft materials with hardness less than Shore A40

Many types of soft materials, such as TPE/TPV/EVA/hot melt adhesive, can only be made through underwater pelletizing system.

4) Synthesis and reaction of polymers

Polymerization, reactive extrusion, and transformation from liquid to particles can usually be achieved through underwater cutting of many materials.

General Applications

• PP, PE and its compounds, various of thermoplastic elastomers, PA, TPU, EVA, and other hot melt adhesives.
• Extensive heat and mass transfer, narrow residence time distribution, large surface-to-volume ratio, continuous operation. Ideal for high-viscosity, high-temperature reaction systems.
• Continuous polymerization or reactive extrusion like dynamic vulcanization, crosslinking, grafting, and chain extension of PUR, PA, POM, PEI, PC, PMMA, PBT, PPS, etc.

Specifikation

Driving Valve

Discharging position
work location
Hydraulic drive

Pelletiserare

Template heating: heater, electromagnetic heating or oil,
Two types of blades: bevel blades and vertical blades. It is designed for different materials.
Two blades pressure settings: manual and hydraulic.
Online blads sharpening
One-touch start/stop

Connected to the air pipe, the blade pressure can be set on the touch screen, and the system automatically refines the blade according to the set time and pressure.

Dehydration And Water Circulation System

Water tank with heating system, water level and temperature control.
The dehydrator rotor and drive motor are directly connected to improve work efficiency.
Bulk material separator
Drainage system with additional fans to remove moisture.
The heat exchanger is easy to clean.
Using three valves in one, it truly realizes zero compensation for the time difference from discharging, water supply, and cutting time difference. Perfect One-touch start. easy to operate.